Category Archives: Annual Certification and Inspection

CSG’s Fall Protection Regulations

CSG Safety Services Group published Fall Protection Regulations article to promote the prevention of common fall hazards.

CSG promotes OSHA fall protection regulations to help construction management, architects, building owners and facility managers prevent accidents and avoid costly and reputation damaging Cal-OSHA citations.

Both Federal and Cal-OSHA (Occupational Safety & Health Administration) found high proportion of fatalities caused by falls occurred because of a lack of fall protection.

Visit CSG Safety Services Group – CSG Safety Services Group, LLC designs and installs window washing systems nationwide. CSG provides inspections, testing and certifications for all window cleaning equipment. CSG provides consulting up to full design/build services. The CSG Safety Services Group promotes window washing system solutions with safety, usability, and cost effectiveness in mind. www.windowwashingsystems.com.

Earthquake Safety in High-rise Buildings

A great earthquake has never tested modern construction of high-rise buildings. Ongoing studies question code requirements that were developed 20 years ago for mostly low and mid-rise buildings. High-rise construction can be more vulnerable because of unanticipated structural behaviors that were not written into original codes. Safety preparation for earthquakes like emergency drills can help to prevent damage and reduce injury.

Safety Tips for High-rise Buildings

1. Drop, cover, and hold on. Get under a desk or table as a doorway maybe unsound during a quake. If unable to get under a structure, move against an interior wall and protect neck with arms.
2. In a high-rise building, get away from windows and outside walls.
3. Expect that fire alarms and sprinklers may go off, although electricity may go out.
4. If the situation worsens and you become trapped, stay calm and get attention of rescuers by tapping on hard structures or metal to alert them of your location.
5. Do not use elevators or window cleaning equipment until they have been properly inspected for structural integrity.

About Contract Services Group, Inc.:
Contract Services Group, Inc. is an industry leading facilities services contractor with 40 years experience providing commercial janitorial, window cleaning, housekeeping staffing services and window washing systems. CSG is committed to safety excellence, high-performing building outcomes and redefining quality partnerships. http://www.csgcares.com

CSG Safety Excellence – Rescued Again Update:

Last week, scaffolding maintenance workers were rescued from the 56th floor of the Hearst Tower after the building platform snapped in the middle.

The building’s odd shape called for a custom model from Tractel-Swingstage consisting of a 420-foot elevated steel track off a 40-foot mast with a hydraulic arm holding the telescopic cleaning basket with wires monitored by electromechanical sensors.

Tractel is under scrutiny because of a 2007 accident in which a scaffolding structure plummeted 47 stories killing one worker.  Tractel was found in violation for failing to maintain the scaffold.

High-rise scaffolding rescues and accidents are often the result of faulty or outdated support systems or poor operator training.

Window Washing SystemsCSG President, Casey Pearce, explained, “A safe working environment for individuals working at heights is OSHA compliant supports, suspension and safety systems. Those systems need to be certified annually and even experienced workers need to have documented professional operator training.“

U.S. Occupational Safety and Health Administration (OSHA) investigate any incident to determine whether the situation is the result of non-compliant procedures, support system failure or operator error. So far the cause of last week’s incident has not been determined but will likely be closely reviewed.

Click to learn more about CSG Annual Inspection Services & CSG Safety Committee.

Safety Compliance is Easy.

Does OSHA safety regulations weaken competitiveness and hurt jobs? A recent study showed inspections led to a 9% decline in injury and related costs dropped 26% without effect on jobs.  The key was random inspections.

The federal agency, U.S. Occupational Safety and Health Administration, enforces safety standards with these inspections and investigations by verifying workplace compliance to regulation and facilitating safe working environments.

“Our study suggests that randomized inspections work as they’re meant to, improving safety while not undermining the company’s ability to do business,” says Toffel.  Read more –

Safety compliance is as easy as CSG. From the design and installation of basic fall protection systems, to in-depth fall hazard analysis, Contract Services Group is the best single source provider of both window washing access and fall protection solutions. All of our window cleaning equipment inspections and certifications are in compliance with Cal-OSHA General Industry Safety Orders, Title 8. Article 5 Window Cleaning.

CSG’s Safety Committee for your Window Washing Certification

With new window washing companies starting every day, it’s no surprise that not all companies are keeping up with all the regulations.  If you employ a window washing or janitorial company, you want to be assured that their equipment and knowledge is current.

In fact, both building owners and contractors need to meet specific standards to ensure a safe work place and prevent incidents of injury or even death. Even if the contractor provides equipment, the building owner is still required to inspect the equipment and verify the support systems. Maintenance records, manufacturer’s assurance documentation, and contractor instructions are just a few examples of the documentation a building owner is required to have.

CSG is committed to safety excellence, high-performing building outcomes and redefining quality partnerships. CSG’s Safety Committee meets monthly and directs all safety initiatives for the organization including maintaining knowledge of all window cleaning codes and regulations.

At CSG every employee has the authority to shut down any company operation they deem to be unsafe. Over the years we have found that safety both supports and enhances many of our other programs, such as continuous improvement and quality control.

The ANSI/IWCA I-14.1 Window Cleaning Safety standards and regulations were established in 2001 to prevent incidents of injury and death by the International Window Cleaning Association (IWCA), with the help of the Building Owners and Managers Association (BOMA). For more information about these established guidelines, see this article,  “New Standard Promotes Window-Washing Safety.